Atari 2600 Joystick Replacement Cable - 9 pin/9 wires

*NOTE* These are meant to be used with our All NEW Atari 2600 joystick circuit boards (You can purchase them as a set. See our other listings.) OR you can buy them for any project that needs all 9 wires in a DB-9 plug.

Our ALL NEW Atari 2600 joystick replacement cable is unique in that we ran all 9 wires from connector to connector. When paired with our NEW 2600 circuit board, the excess wires just dead end at the board. BUT, if you have a need for the extra lines (including 5 volts), you can simply cut off the white connector and adapt the cable for any use you may have. By designing this cable and our replacement circuit boards, we have eliminated the old unreliable slide contacts used on the original Atari 2600 joysticks.